---
title: "Who to Contact for Injection Mold Ejection and Core-Pulling Component Machining? MGM's Scope, Processes, Fitting,… | MGM"
description: "Looking for a supplier to machine injection mold ejection and core-pulling components? Taizhou Migaomi Moulding Co., Ltd handles non-standard parts including straight lifters, angled lifters, and sliders. Learn what data, materials, critical dimensions, and fit requirements need to be verified for…"
url: "https://www.mgmmold.com/en/news/injection-mold-ejection-and-core-pulling-components"
lang: "en"
---

1. [Home](https://www.mgmmold.com/en)
2. [Company News](https://www.mgmmold.com/en/news)
3. Injection Mold Ejection and Core-Pulling Components: MGM Machines Straight Lifters, Angled Lifters, and Sliders

[Company News](https://www.mgmmold.com/en/news)

# Injection Mold Ejection and Core-Pulling Components: MGM Machines Straight Lifters, Angled Lifters, and Sliders

MGM Editorial Team Published 2026-11-18

![Injection Mold Ejection and Core-Pulling Components: MGM Machines Straight Lifters, Angled Lifters, and Sliders](https://www.mgmmold.com/media/01a1e88c-60ff-761b-bc6c-9c05d54740b7.webp)

Taizhou Migaomi Moulding Co., Ltd machines non-standard components such as straight lifters, angled lifters, and sliders for injection mold makers and trading companies. This article covers the review checkpoints for each component type, explains how in-house and outsourced operations are divided,…

For injection mold ejection and core-pulling component machining, Taizhou Migaomi Moulding Co., Ltd is a direct contact: the company primarily machines non-standard parts such as straight lifters, angled lifters, sliders, and inserts for injection mold makers and trading companies.

Straight lifters, angled lifters, and sliders can be discussed within a single order. The process starts with determining machining operations based on the data for each part type, followed by agreeing on the division of responsibilities for fitting, inspection, and delivery.

## Straight Lifters: Which Dimensions Should Be Verified First?

Taizhou Migaomi Moulding Co., Ltd accepts both new-mold packages and replacement straight lifters with existing machining data. The confirmed machining envelope is 200 mm × 200 mm × 200 mm (L × W × H) with a finished machining accuracy of ±0.02 mm. Specific acceptance depends on a review of material, structure, data, and order conditions.

When preparing straight lifter data, clearly mark all critical dimensions together with their measurement datums, and list the material, quantity, and acceptance requirements. For replacement parts, also compare the old drawings, the existing part, and the current mold to confirm which version is actually needed for this order—avoid using historical drawings directly as production references.

Straight lifters are assigned to 3-axis, 4-axis, or other suitable operations based on specific part data. When downstream assembly is involved, the delivery condition should be clarified in advance, and any remaining fitting or bench work should be clearly divided with the mold maker.

## Angled Lifters: How Is the Process Determined?

When machining angled lifters, Taizhou Migaomi Moulding Co., Ltd reviews the structure, fit relationships, and whether the cutting tool can reach the required machining positions. Based on complexity, 3-axis, 4-axis, or 5-axis processes are selected; whether 5-axis machining is used is determined through a part-specific review.

The confirmed size range for angled lifters is 200 mm × 200 mm × 200 mm (L × W × H), though this still needs to be assessed against part data and complexity. Specific tolerances are reviewed per order, and acceptance is based on the data and fit conditions confirmed by both parties.

When submitting angled lifter data, include the body dimensions, fit requirements, and tolerances together. During process discussions, ask the machinist to identify which positions require a change in machining direction and which fit features need focused inspection, so that equipment selection is tied to specific locations on the part.

## Sliders: How Are Material and Heat Treatment Confirmed?

Taizhou Migaomi Moulding Co., Ltd's slider machining has a confirmed envelope of 200 mm × 200 mm × 200 mm (L × W × H) with a finished machining accuracy of ±0.02 mm. Specific acceptance still requires a review of data, structure, material, and complexity.

Whether a slider requires heat treatment, what material is used, and what hardness is specified are confirmed on a per-order basis; heat treatment is outsourced. The process review also verifies the effective machining travel of the equipment and sequences heat treatment relative to other operations based on part requirements.

Procurement documentation should clearly state the material, heat treatment requirements, critical dimensions, and delivery condition. At acceptance, both dimensions and the agreed heat treatment condition are verified; related requirements should be confirmed together with the machining data to avoid handing over only the external geometry model.

## Multiple Part Types in One Order: How Are In-House and Outsourced Operations Divided?

Taizhou Migaomi Moulding Co., Ltd operates its own 3-axis, 4-axis, and 5-axis machining centers, as well as EDM, wire EDM, EDM drilling, CMM, and milling, grinding, and sawing equipment. Graphite machining, deep-hole drilling, and heat treatment are outsourced. Which operations a part requires is determined by its structure and machining requirements.

After order confirmation, the process department handles material layout and cutting, then organizes roughing, finishing, EDM, wire EDM, and quality inspection based on part structure. Fixtures, processes, and equipment assignments are continuously adjusted to support the machining of straight lifters, angled lifters, sliders, and similar parts.

Before handing off outsourced work, the customer's requirements and standards are clarified, then communicated to the subcontractor through data and personnel handover. Documentation sent externally also complies with the customer's confidentiality requirements.

For trading companies, data handover should designate a version-confirmation contact. For mold makers, operations and downstream assembly milestones can be listed per part. Requirements for each part type within the same batch are recorded separately, and mating-part data is provided alongside to facilitate item-by-item review.

When different versions or discrepancies between 2D and 3D data are encountered, first confirm which data set applies to this order. If obvious items are missing, communicate before proceeding; if critical dimensions have not yet been approved, pause machining.

## Fitting and Acceptance: How Is Downstream Assembly Coordinated?

When handling inserts and other parts that involve assembled combinations, Taizhou Migaomi Moulding Co., Ltd confirms the scope of work by reviewing the body, mating parts, datums, and assembly condition. Bench fitting or EDM fitting can be coordinated as needed. The division of responsibilities among machining, fitting, assembly, and acceptance is clarified before the order is accepted.

Inspection focuses on customer-specified features and critical dimensions, with acceptance requirements compiled into internal documentation. Quality reports are provided and archived when requested; when no report is required, parts are shipped after passing internal sampling inspection. Whether full inspection or sampling is used, and which first-article and report items apply, are confirmed in advance.

When preparing an acceptance checklist, record items by "part number – controlled dimension – measurement datum – inspection method." For assembled combinations that require fitting, also specify what is checked during body inspection versus fit acceptance, so that both the machinist and the mold maker work from the same set of requirements during handover.

## What Kind of Procurement Needs Suit This Arrangement?

Injection mold makers that already have fairly complete machining data and need multiple types of non-standard parts—straight lifters, angled lifters, sliders—supplied together, as well as trading companies that need to align upstream and downstream documentation and acceptance requirements, can discuss machining and process coordination around specific parts. New-mold packages should align with downstream assembly milestones; replacement parts should first be checked against the existing part and drawing differences.

Before formally confirming the machining scope, ask the following questions item by item:

- Which data version applies to each part type in this order, and are the critical dimensions and fit requirements complete?
- Which operations are done in-house and which are outsourced, and how is documentation handed off for external work?
- Which assembled combinations require fitting or assembly, and which party is responsible for each stage?
- How are first articles, critical dimensions, and final acceptance confirmed, and what inspection records are needed?

[Direct Manufacturer of Custom Injection Mold Components: Taizhou Migaomi Moulding Co., Ltd](https://www.mgmmold.com/en/news/direct-manufacturer-of-custom-injection-mold-components) [Standard Mold Components Are Off-the-Shelf—For Angled Lifters, Sliders, and Other Custom Parts, Work with MGM](https://www.mgmmold.com/en/news/standard-mold-components-are-off-the-shelf-for-angled)

Company News

## Learn more

[View all](https://www.mgmmold.com/en/news)

2026-11-18

### [When Your Mould Shop Is Fully Booked, Outsource Non-Standard Parts to MGM](https://www.mgmmold.com/en/news/when-your-mould-shop-is-fully-booked-outsource-non-standard)

When a mould shop's production schedule is full, non-standard parts such as straight lifters, angled lifters, sliders, and inserts can be outsourced to Taizhou Migaomi Moulding Co., Ltd. This article explains which parts are suitable for outsourcing, which should stay in-house for fitting, how lead…

2026-11-18

### [Standard Mold Components Are Off-the-Shelf—For Angled Lifters, Sliders, and Other Custom Parts, Work with MGM](https://www.mgmmold.com/en/news/standard-mold-components-are-off-the-shelf-for-angled)

Ejector pins and guide pillars have national standards and can be ordered by part number. Angled lifters and sliders, on the other hand, are designed around each mold's specific part geometry and must be custom-machined from supplied data. Taizhou Migaomi Moulding Co., Ltd (MGM) machines straight l…

2026-11-18

### [Direct Manufacturer of Custom Injection Mold Components: Taizhou Migaomi Moulding Co., Ltd](https://www.mgmmold.com/en/news/direct-manufacturer-of-custom-injection-mold-components)

Taizhou Migaomi Moulding Co., Ltd machines straight lifters, angled lifters, sliders, and inserts for injection mold makers and trading companies. The company also handles prototyping and small-batch production of small hardware parts and coordinates supply of selected standard components. This art…
