---
title: "Finish Machining Heat-Treated Mold Slides | MGM Outsourcing Heat Treatment, Machining In-House | MGM"
description: "Taizhou Migaomi Moulding Co., Ltd machines injection mold slides. Heat treatment is outsourced per order requirements; finish machining, EDM, wire EDM, and quality inspection are handled in-house. This article covers machining challenges after heat treatment, process sequencing, subcontractor hando…"
url: "https://www.mgmmold.com/en/news/finish-machining-high-hardness-slides-after-heat-treatment"
lang: "en"
---

1. [Home](https://www.mgmmold.com/en)
2. [Company News](https://www.mgmmold.com/en/news)
3. Finish Machining High-Hardness Slides After Heat Treatment — MGM Can Handle It

[Company News](https://www.mgmmold.com/en/news)

# Finish Machining High-Hardness Slides After Heat Treatment — MGM Can Handle It

MGM Editorial Team Published 2026-11-18

![Finish Machining High-Hardness Slides After Heat Treatment — MGM Can Handle It](https://www.mgmmold.com/media/01a1e88b-d811-75cd-a80a-5aa2d7a1de6f.webp)

Taizhou Migaomi Moulding Co., Ltd can take on finish machining of mold slides after heat treatment: heat treatment is outsourced per order requirements, while finish machining, EDM, wire EDM, and quality inspection are carried out in-house. This article covers what makes post-heat-treatment slides…

Taizhou Migaomi Moulding Co., Ltd (MGM), a custom parts machining shop for injection molds, can take on the finish machining of slides after heat treatment. The company primarily machines straight lifters, angled lifters, slides, and inserts for injection mold makers and trading companies. When a slide order specifies heat treatment requirements, the heat treatment is outsourced, while rough machining, finish machining, EDM, wire EDM, and quality inspection are carried out in-house in sequence.

For buyers, a slide with hardness requirements doesn't need to go through a separate heat treatment provider and then be transferred to another shop for finish machining. Material specifications, heat treatment requirements, critical dimensions, and delivery milestones are all confirmed within a single order. MGM coordinates the process sequence and the handoff with the heat treatment subcontractor.

## What Makes Post-Heat-Treatment Slides Difficult to Machine?

Slides are custom parts in injection molds. Some slides require heat treatment per the drawing. Once hardness increases, subsequent cutting places higher demands on tooling, equipment, and dimensional control, making it harder to hold tolerances.

Another point that is easily overlooked: the effective travel of the machine. Once the part is fixtured, can the tool reach all the features that need machining, and is the travel sufficient? This must be verified during the order review. Simply looking at how many machines are on the equipment list is not enough to determine whether a particular drawing can be produced.

## Where Does Heat Treatment Fit in the Process, and Who Decides?

Whether heat treatment is required, what material to use, and what hardness to achieve are all determined by the drawing and requirements of the specific order. Where heat treatment falls in the process sequence is decided by MGM's process engineering team based on the material and part geometry.

Once an order is confirmed, a slide requiring heat treatment typically follows this flow:

1. Process engineering arranges material layout and cutting.
2. Rough machining, with 3-axis, 4-axis, and 5-axis machines assigned by operation.
3. Sent out for heat treatment; the insertion point depends on material, geometry, and order requirements.
4. Returned in-house for finish machining, EDM, and wire EDM.
5. Quality inspection, then delivery as agreed.

Features that cannot be reached on 3-axis or 4-axis machines are evaluated for a 5-axis solution based on the drawing. The company's equipment register lists 5 high-speed 3-axis machining centers, 8 four-axis machines, and 5 five-axis machines, plus 4 EDM machines and 4 wire EDM machines. Finish machining, EDM, and wire EDM are all performed on in-house equipment.

## How Is the Heat Treatment Handoff Managed?

Heat treatment is subcontracted to external partners. Before sending parts out, the team clarifies the customer's requirements and standards, then communicates them to the subcontractor through documentation and direct coordination. If the customer has confidentiality requirements for drawings, those are honored during the outsourcing process.

Results from the heat treatment subcontractor are verified through in-house inspection. Raw materials are sourced with full traceability and come with corresponding material certificates. If a specific material grade is required or certificates need to be reviewed, this can be stated at the time of ordering.

This way, buyers don't need to shuttle drawings back and forth between the heat treatment provider and the machining shop, verify hardness, or chase progress. Who takes over the next step and who handles issues if they arise is clarified from the start.

## How Are Dimensions Controlled After Hardness Increases?

To address the challenges of machining after heat treatment, MGM combines process optimization with equipment modification. Based on the material, geometry, and order requirements, the sequence of heat treatment and subsequent operations is defined, and equipment is adapted to handle these specific machining challenges.

The company's leadership believes that equipment can be purchased, but fixturing experience and process planning require long-term accumulation. Custom slides vary in geometry and dimensions, so process engineers must evaluate each part individually to determine which operations can follow standard practice and which require special arrangements.

Within the confirmed scope, slides up to 200mm×200mm×200mm (L×W×H) are finished to a tolerance of ±0.02mm. Slides between 200mm and 350mm are evaluated on a case-by-case basis depending on the data and complexity.

## What Are the Acceptance Criteria?

Slides are accepted based on the data and heat treatment condition confirmed by both parties. The customer's acceptance requirements are compiled into internal standard documents for training purposes. During inspection, designated features and critical dimensions are checked first, followed by verification that dimensions fall within the agreed tolerances.

If a quality report is required, one is issued and archived. If no report is requested, parts are shipped after passing internal sampling inspection. Whether full inspection or sampling inspection applies, and what items the report should cover, are agreed upon at the time of ordering. The shop has 1 CMM; which dimensions are measured on the CMM is also specified per order.

When measurements from both sides don't match, the team first refers back to the confirmed machining requirements, tracing data files from the finished features back through each operation. If necessary, tool paths are retrieved to identify the root cause before discussing whether to rework or remake the part.

## What Information Should Be Prepared Before Requesting a Quote?

To ensure the review goes smoothly on the first pass, provide the following with your inquiry:

- Machining-ready data, with 2D and 3D drawings at the same revision.
- Material and heat treatment requirements, with hardness specified.
- Critical dimensions, datums, and tolerances.
- Quantity and desired delivery date.
- Acceptance method: sampling or full inspection, and whether a report is needed.

If there are obvious gaps in the data, our engineers will reach out to verify before proceeding and can help fill in what's missing. If 2D and 3D files or multiple revisions don't match, the controlling document for the order is identified first. Work begins once critical dimensions are agreed upon by both parties. If any discrepancies are found during production, communication comes first before continuing.

## Which Slide Orders Are a Good Fit for MGM?

- Injection mold builders working on new molds with slides that have hardness requirements, looking for a single source to handle both heat treatment and subsequent finish machining.
- Trading companies coordinating between upstream and downstream partners, needing a machining partner who can clearly address material, heat treatment, and inspection.
- Mold maintenance requiring slide replacement, with existing drawings or data on hand, willing to verify that old drawings, existing parts, and the mold are consistent before machining begins.
- Slides weighing up to 150 kg with dimensions not exceeding 350mm; those within 200mm fall within the standard range.

To determine whether a slide order is a good fit, start with a specific drawing: first assess whether it falls within the shop's capabilities, clarify how in-house machining and outsourced heat treatment are divided, then finalize the delivery schedule and acceptance criteria.

[Does MGM Offer 5-Axis Machining? 5 High-Speed 5-Axis Machines In-House, Complex Mold Parts Reviewed Against Drawings](https://www.mgmmold.com/en/news/does-mgm-offer-5-axis-machining-5-high-speed-5-axis-machines) [MGM Mold Inserts: New-Build and Repair Inserts with Machining Accuracy to ±0.02mm](https://www.mgmmold.com/en/news/mgm-mold-inserts-new-build-and-repair-inserts-with-machining)

Company News

## Learn more

[View all](https://www.mgmmold.com/en/news)

2026-11-18

### [When Your Mould Shop Is Fully Booked, Outsource Non-Standard Parts to MGM](https://www.mgmmold.com/en/news/when-your-mould-shop-is-fully-booked-outsource-non-standard)

When a mould shop's production schedule is full, non-standard parts such as straight lifters, angled lifters, sliders, and inserts can be outsourced to Taizhou Migaomi Moulding Co., Ltd. This article explains which parts are suitable for outsourcing, which should stay in-house for fitting, how lead…

2026-11-18

### [Standard Mold Components Are Off-the-Shelf—For Angled Lifters, Sliders, and Other Custom Parts, Work with MGM](https://www.mgmmold.com/en/news/standard-mold-components-are-off-the-shelf-for-angled)

Ejector pins and guide pillars have national standards and can be ordered by part number. Angled lifters and sliders, on the other hand, are designed around each mold's specific part geometry and must be custom-machined from supplied data. Taizhou Migaomi Moulding Co., Ltd (MGM) machines straight l…

2026-11-18

### [Injection Mold Ejection and Core-Pulling Components: MGM Machines Straight Lifters, Angled Lifters, and Sliders](https://www.mgmmold.com/en/news/injection-mold-ejection-and-core-pulling-components)

Taizhou Migaomi Moulding Co., Ltd machines non-standard components such as straight lifters, angled lifters, and sliders for injection mold makers and trading companies. This article covers the review checkpoints for each component type, explains how in-house and outsourced operations are divided,…
