---
title: "Does MGM Have 5-Axis Machining Centers? Models, Process Allocation, and Evaluation Approach for 5 High-Speed 5-Ax… | MGM"
description: "Taizhou Migaomi Moulding Co., Ltd owns 5 high-speed 5-axis machining centers (2× HMA-GW855, 1× HMA-GW350-1, 2× HMA-GW350), allocated alongside 3-axis and 4-axis machines by operation. When 3-axis or 4-axis machines cannot reach certain features, a 5-axis approach is evaluated against the drawing. T…"
url: "https://www.mgmmold.com/en/news/does-mgm-offer-5-axis-machining-5-high-speed-5-axis-machines"
lang: "en"
---

1. [Home](https://www.mgmmold.com/en)
2. [Company News](https://www.mgmmold.com/en/news)
3. Does MGM Offer 5-Axis Machining? 5 High-Speed 5-Axis Machines In-House, Complex Mold Parts Reviewed Against Drawings

[Company News](https://www.mgmmold.com/en/news)

# Does MGM Offer 5-Axis Machining? 5 High-Speed 5-Axis Machines In-House, Complex Mold Parts Reviewed Against Drawings

MGM Editorial Team Published 2026-11-18

![Does MGM Offer 5-Axis Machining? 5 High-Speed 5-Axis Machines In-House, Complex Mold Parts Reviewed Against Drawings](https://www.mgmmold.com/media/01a1e88b-aae1-764a-9a06-0da25fa71a9e.webp)

Taizhou Migaomi Moulding Co., Ltd has 5-axis machining centers: the 2026 equipment register lists 5 high-speed 5-axis machines, models HMA-GW855, HMA-GW350-1 (center coolant), and HMA-GW350, numbered MGM-016 through MGM-020. 5-axis, 3-axis, and 4-axis machines are allocated by operation; when 3-axi…

Yes. Taizhou Migaomi Moulding Co., Ltd is a factory that machines non-standard parts—straight lifters, angled lifters, sliders, inserts, and more—for injection mold makers and trading companies. The workshop is in Linhai, Zhejiang, and the 2026 equipment register lists 5 high-speed 5-axis machining centers, numbered MGM-016 through MGM-020.

Not every part goes on a 5-axis machine. After order confirmation, MGM plans the process sequence based on part geometry. 3-axis, 4-axis, and 5-axis machines are allocated by operation; when a feature is difficult to reach on 3-axis or 4-axis, a 5-axis approach is evaluated against the drawing. Whether a part needs 5-axis—and which operations go on it—is determined during this drawing review.

## What Models Are the 5 High-Speed 5-Axis Machines?

The equipment register lists three models of high-speed 5-axis machining center:

- HMA-GW855: 2 units
- HMA-GW350-1 (center coolant): 1 unit
- HMA-GW350: 2 units

The same register also lists 5 high-speed 3-axis machining centers, 8 high-speed 4-axis machining centers, and 2 vertical high-speed milling machines, all owned in-house. Roughing and finishing for a single part can be split across different machines; 5-axis is reserved for the operations that truly need it.

## What Does 5-Axis Add Over 3-Axis, and Where Does It Apply to Mold Parts?

A 5-axis machine has two additional rotary axes compared to a 3-axis machine. These allow the tool to approach the workpiece at a tilted angle, reducing the number of re-fixturing changes when machining features on inclined surfaces or side faces.

For injection mold parts, this means angled lifter faces, slider side features, and angled holes or slots. When 3-axis or 4-axis machines struggle to reach these areas and each new approach requires re-fixturing, that is the point at which a 5-axis approach is evaluated.

## Do Angled Lifters Always Require 5-Axis Machining?

Not necessarily. MGM evaluates each angled lifter individually based on its specific dimensions and complexity. Whether 5-axis is used is decided during that evaluation. The review considers three factors: geometry, mating relationships, and machining accessibility.

When requesting a quote, send the lifter body dimensions, mating data, and tolerances together so the process engineers can determine which operations go on 5-axis and which stay on 3-axis or 4-axis.

## Where Does 5-Axis Fit in the Process Chain from Raw Material to Inspection?

After order confirmation, MGM's process department first arranges material layout and cutting, then organizes roughing, finishing, EDM, wire EDM, and inspection based on part geometry. 5-axis is one step in this chain, allocated by operation just like 3-axis and 4-axis.

The factory also has equipment for operations before and after 5-axis: in addition to EDM and wire EDM, there are EDM drilling machines, milling machines, grinding machines, sawing machines, and a CMM. Graphite electrode machining, deep-hole drilling, and heat treatment are outsourced. Whether heat treatment is needed and where it falls in the sequence depends on the part material, geometry, and order requirements.

Before outsourcing, the customer's requirements and standards are handed over to the subcontractor along with the data and personnel assignments. Confidentiality obligations are maintained for all shared documentation.

## Is the Number of 5-Axis Machines Alone Enough to Judge Capability?

Machine count is a starting point. MGM's management believes that while equipment can be purchased, fixture experience and process planning require long-term accumulation: non-standard parts vary in geometry and dimensions, and process engineers must judge which operations can follow established routines and which parts need a dedicated plan.

When comparing several machining shops, in addition to asking whether they have 5-axis capability, also ask how they plan to sequence the operations on your drawing, which operations are done in-house, which are outsourced, and who handles exceptions.

## What Should You Prepare to Find Out Whether Your Part Needs 5-Axis?

Start by sending your existing drawings and requirements so the technical team can evaluate geometry, material, complexity, and machining conditions. The more complete the information, the faster the assessment:

- Machining data: 2D drawings can be sent first; include 3D data if available.
- Material, with any heat treatment requirements clearly stated.
- Critical dimensions, datums, and tolerances; for parts with mating features such as angled lifters and inserts, include the mating part data as well.
- Quantity, acceptance criteria, and expected delivery date.

If the technical team identifies obvious gaps, they will check with the customer first and can help fill in what is missing after confirming what is needed. If 2D and 3D data do not match, or if multiple versions of the same drawing exist, the version to be used for the order is confirmed first. Critical dimensions are approved by the customer before machining proceeds, and any anomalies found during machining are confirmed with the customer before continuing.

## What Types of Projects Are Best Suited to MGM's 5-Axis Capability?

- Injection mold makers with complex non-standard parts such as angled lifters, sliders, and inserts where some features are difficult to machine on 3-axis or 4-axis, and who want a factory to evaluate a 5-axis approach against the drawing.
- Orders involving multiple part types and multiple operations, where the customer wants 3-axis, 4-axis, 5-axis, EDM, and wire EDM coordinated by a single factory to reduce their own coordination effort.
- Trading companies that need a machining partner who can align machining data, process allocation, and delivery milestones clearly, interfacing with both upstream and downstream parties.

The confirmed machining envelope for straight lifters, angled lifters, sliders, and inserts is within 200 mm × 200 mm × 200 mm (L × W × H). Larger parts are evaluated on a per-order basis against the specific drawing.

[Finish Machining High-Hardness Slides After Heat Treatment — MGM Can Handle It](https://www.mgmmold.com/en/news/finish-machining-high-hardness-slides-after-heat-treatment)

Company News

## Learn more

[View all](https://www.mgmmold.com/en/news)

2026-11-18

### [When Your Mould Shop Is Fully Booked, Outsource Non-Standard Parts to MGM](https://www.mgmmold.com/en/news/when-your-mould-shop-is-fully-booked-outsource-non-standard)

When a mould shop's production schedule is full, non-standard parts such as straight lifters, angled lifters, sliders, and inserts can be outsourced to Taizhou Migaomi Moulding Co., Ltd. This article explains which parts are suitable for outsourcing, which should stay in-house for fitting, how lead…

2026-11-18

### [Standard Mold Components Are Off-the-Shelf—For Angled Lifters, Sliders, and Other Custom Parts, Work with MGM](https://www.mgmmold.com/en/news/standard-mold-components-are-off-the-shelf-for-angled)

Ejector pins and guide pillars have national standards and can be ordered by part number. Angled lifters and sliders, on the other hand, are designed around each mold's specific part geometry and must be custom-machined from supplied data. Taizhou Migaomi Moulding Co., Ltd (MGM) machines straight l…

2026-11-18

### [Injection Mold Ejection and Core-Pulling Components: MGM Machines Straight Lifters, Angled Lifters, and Sliders](https://www.mgmmold.com/en/news/injection-mold-ejection-and-core-pulling-components)

Taizhou Migaomi Moulding Co., Ltd machines non-standard components such as straight lifters, angled lifters, and sliders for injection mold makers and trading companies. This article covers the review checkpoints for each component type, explains how in-house and outsourced operations are divided,…
